freq. multipliers - active - smt 7 7 - 94 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com hmc575lp4 / 575lp4e smt gaas mmic x2 active frequency multiplier, 6 - 9 ghz output v00.0506 general description features functional diagram electrical specifi cations, t a = +25 c, vdd1, vdd2 = +5v, 3 dbm drive level typical applications the hmc575lp4 / hmc575lp4e is suitable for: ? wireless local loop ? point-to-point & vsat radios ? test instrumentation ? military & space the hmc575lp4 & hmc575lp4e are x2 active broadband frequency multipliers utilizing gaas phemt technology in a leadless rohs compliant smt package. when driven by a 3 dbm signal, the multiplier provides +17 dbm typical output power from 6 to 9 ghz. the fo and 3fo isolations are 15 dbc with respect to output signal level. this frequency multiplier features dc blocked i/os, and is ideal for use in lo multiplier chains for pt to pt & vsat radios yielding reduced parts count vs. traditional approaches. the low additive ssb phase noise of -140 dbc/hz at 100 khz offset helps maintain good system noise performance. the hmc575lp4 & hmc575lp4e are compatible with surface mount manufacturing techniques. high output power: +17 dbm low input power drive: -2 to +6 dbm fo, 3fo isolation: 15 dbc 100 khz ssb phase noise: -140 dbc/hz single supply: +5v@ 90 ma rohs compliant 4x4 mm smt package parameter min. typ. max. units frequency range, input 3 - 4.5 ghz frequency range, output 6 - 9 ghz output power 14 17 dbm fo isolation (with respect to output level) 15 dbc 3fo isolation (with respect to output level) 15 dbc input return loss 15 db output return loss 12 db ssb phase noise (100 khz offset) -140 dbc/hz supply current (idd1 & idd2) 90 ma
freq. multipliers - active - smt 7 7 - 95 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com hmc575lp4 / 575lp4e output power vs. temperature @ 3 dbm drive level output power vs. supply voltage @ 3 dbm drive level output power vs. drive level v00.0506 smt gaas mmic x2 active frequency multiplier, 6 - 9 ghz output output power vs. input power isolation @ 3 dbm drive level 0 5 10 15 20 25 5.5 6 6.5 7 7.5 8 8.5 9 9.5 +25c +85c -40c output power (dbm) output frequency (ghz) -15 -10 -5 0 5 10 15 20 25 -10-8-6-4-20246810 6 ghz 7.5ghz 9 ghz output power (dbm) input power (dbm) -15 -10 -5 0 5 10 15 20 25 6 6.5 7 7.5 8 8.5 9 fo 2fo 3fo output power (dbm) output frequency (ghz) 0 5 10 15 20 25 6 6.5 7 7.5 8 8.5 9 vdd=4.5v vdd=5.0v vdd=5.5v output power (dbm) output frequency (ghz) -10 -5 0 5 10 15 20 25 6 6.5 7 7.5 8 8.5 9 -2dbm 0dbm 2dbm 4dbm 6dbm output power (dbm) frequency (ghz)
freq. multipliers - active - smt 7 7 - 96 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com input return loss vs. temperature output return loss vs. temperature -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 6 6.5 7 7.5 8 8.5 9 +25c +85c -40c output return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 3 3.25 3.5 3.75 4 4.25 4.5 +25c +85c -40c input return loss (db) frequency (ghz) hmc575lp4 / 575lp4e v00.0506 smt gaas mmic x2 active frequency multiplier, 6 - 9 ghz output absolute maximum ratings rf input (vdd = +5v) +13 dbm supply voltage (vdd) +6.0 vdc channel temperature 150 c continuous pdiss (t= 85 c) (derate 7.9 mw/c above 85 c) 512 mw thermal resistance (channel to ground paddle) 127 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c typical supply current vs. vdd vdd (vdc) idd (ma) 4.5 89 5.0 90 5.5 91 note: multiplier will operate over full voltage range shown above. electrostatic sensitive device observe handling precautions
freq. multipliers - active - smt 7 7 - 97 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com outline drawing hmc575lp4 / 575lp4e v00.0506 smt gaas mmic x2 active frequency multiplier, 6 - 9 ghz output notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative. 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application not for suggested land pattern. part number package body material lead finish msl rating package marking [3] hmc575lp4 low stress injection molded plastic sn/pb solder msl1 [1] h575 xxxx hmc575lp4e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h575 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information
freq. multipliers - active - smt 7 7 - 98 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pin number function description interface schematic 1, 5 - 14, 18, 19, 21, 23, 24 n/c these pins are internally not connected; however, this product was specifi ed with these pins connected to rf/ dc ground. 2, 4, 15, 17 gnd package bottom must also be connected to rf/dc ground. 3rfin pin is ac coupled and matched to 50 ohms from 3 - 4.5 ghz. 16 rfout pin is ac coupled and matched to 50 ohms from 6 - 9 ghz. 20, 22 vdd2, vdd1 supply voltage 5v 0.5v. external bypass capacitors of 100 pf and 2.2 f are required. pin description application circuit component value c1, c2 100 pf c3, c4 2.2 f hmc575lp4 / 575lp4e v00.0506 smt gaas mmic x2 active frequency multiplier, 6 - 9 ghz output
freq. multipliers - active - smt 7 7 - 99 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com evaluation pcb the circuit board used in the fi nal application should be generated with proper rf circuit design tech- niques. signal lines should have 50 ohm imped- ance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 112405 [1] item description j1, j2 pcb mount sri sma connector j3 - j5 dc pin c1, c2 100 pf capacitor, 0402 pkg. c3, c4 2.2 f tantalum capacitor u1 hmc575lp4 / hmc575lp4e x2 active multiplier pcb [2] 115270 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 hmc575lp4 / 575lp4e v00.0506 smt gaas mmic x2 active frequency multiplier, 6 - 9 ghz output
|
